Yanhua BMW G/F Series Mileage Correction Tool Kit YH35XX programmer + 35128WT Emulator + ID7 Filter + ID8 Filter

Yanhua BMW G Series Mileage Correction Tool Kit includes: YH35XX programmer+35128WT Emulator+ID7 Filter+ID8 FilterSupport 35160WT/35128WT EEPROM F Chassis Odometer 35128WT G chassis VDO odometerSupport BMW G Series ID7/ID7 Full LCD Instrument Cluster CalibrationNo need soldering, Plug and Play, Safe & Reliable; NO black screen, NO red dots.

offer top quality Yanhua BMW G/F Series Mileage Correction Tool Kit YH35XX programmer + 35128WT Emulator + ID7 Filter + ID8 Filter

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of Yanhua BMW G/F Series Mileage Correction Tool Kit YH35XX programmer + 35128WT Emulator + ID7 Filter + ID8 Filter

Yanhua BMW G Series Mileage Correction Tool Kit

Bundle Contents

YH35XX programmer + 35128WT Emulator + ID7 Filter + ID8 Filter

Functions

• Read original 35160WT/35128WT IMMO data and modify it, then write the modified data into the emulator.
• When changing the mileage of the ID7 odometer, the ID7 filter prevents the real mileage from the IMMO module from synchronizing with the ID7 meter.
• When changing the mileage of the ID8 odometer, the ID8 filter prevents the mileage in the IMMO module from being synchronized to the odometer.

Features

• Independent programmer with built-in software.
• Software runs directly when the programmer is connected to a PC.
• Simulator replaces the original 35160WT/35128WT EEPROM.
• Simple operation with no risk—no red dot on odometer, no black screen.

Supported Models

• F series odometers with 35128WT EEPROM
• G series VDO odometers
• Compatible with M35080 / M35080-3 / M35080-6 / M35080V6 / M35080VP / 80DOWQ / 080DOWT / 160DOWT / 160DOWQ / 35160WT* / 35128WT chips
• Supports BMW 2019+ models: 5/7/X5/X7 with ID7 instrument clusters
• Supports BMW 2020+ models: 3/X3/X4/X6 with ID7 instrument clusters
• Supports BMW G series ID8 odometers including 3/4/5/7/X5/X6/X7/XM

How the BMW G Series Mileage Correction Works

1. Remove the instrument module first.
2. Remove the 35128WT/35160WT chip from the instrument module.
3. Use the YH35XX programmer to read the data from the original car’s 35128WT/35160WT chip, write it into the simulator chip, and then adjust to the target mileage.
4. Solder the emulator chip onto the instrument module.
5. Insert the ID7 or ID8 filter into the instrument module—installation complete.

Package List

• 1pc x YH35XX Programmer
• 1pc x Simulator
• 1pc x Solderless chip clamp
• 1pc x 8-Pin chip adapter board
• 1pc x ID7 Filter
• 1pc x ID8 Filter

Go to Buy: Yanhua BMW G/F Series Mileage Correction Tool Kit YH35XX programmer + 35128WT Emulator + ID7 Filter + ID8 Filter