AURO OtoSys IM100 Automotive Diagnostic Tool
OtoSys IM100 from Auro is the ONE tool you need for modern vehicle key programming!
Based on a 7-inch Android touchscreen tablet, and equipped with the key programmer UP200, the OtoSys IM100 provides unparalleled IMMObilizer and Key Programming functions as well as OE-level diagnostic functions and services!
Embedded a 1.6 GHz quad-core processor and a 32-gigabyte solid state drive into a 7-inch touchscreen tablet, the compact IM100 allows you to multitask on the open source Android 4.4 operating system with quick responses. Save a lot repair and maintenance time!
AURO OtoSys IM100 Features:
* Support IMMO functions for different makes and models.
* Equipped with UP200 to support transponder read/write/identification, ECU/EEPROM chip read/write and IMMO password read.
* Display live data is text, graph & analog for easy data review.
* Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time.
* Support relearn parking brake pad after replacement.
* Support forced regeneration and adjusting injectors.
* Support Steering Angle Sensor (SAS) services.
* Support service mileage and service intervals reset.
* Support TPMS sensor relearn.
* Support battery registration and reset.
* Support online update.
NOTE: This function is supported. This function is not supported.
Special Declaration:
Some of the listed functions are manufacture dependent. The functions and vehicle coverage expand with new update release
OtoSys IM100 | OtoSys IM600 | |
---|---|---|
IMMO | ||
Smart Mode (Guided and Automated Key Learning Function) | ||
Auto Detect Make/Model/Year/System | ||
Read PIN/CS | ||
Read PIN/CS (All Keys Lost) | ||
Key Learning | ||
IMMO ECU Reset/Adaption | ||
IMMO ECU Refresh/Coding | ||
Remote Learning | ||
Audi Q5/A4/A5 2015-2017 Read PIN/CS | ||
BMW FEM/BDC Key Learning and Adaption | ||
Mercedes Key Learning | ||
Programming | ||
EEPROM Read/Write | ||
MCU Read/Write | Basic | Advanced |
Key Programming | ||
IC Card Read/Write | ||
Mercedes Infrared Key Read/Write | ||
Remote Frequency Detect | ||
OE-Level Diagnostics | ||
All Systems for Over 80 Makes and Models | ||
OtoFlash (J2534 ECU Reprogrammer) | ||
Advanced Service Functions | ||
Oil Serive Reset | ||
Parking Brake Pad Relearn After Replacement | ||
Steering Angle Sensor Relearn | ||
Battery Registration and Reset | ||
Diesel Particulate Filter Regeneration | ||
Tire Pressure Monitoring System | ||
ECU Coding | ||
VW/Audi Component Protection | ||
Complete Service Functions | ||
Tool Features | ||
Built-in Rechargeable Li-ion Battery | 5000 mAh | 15000 mAh |
Internet Updatable | Wi-Fi | Wi-Fi |
Multilingual Support | ||
Limited One Year Warranty | ||
Touchscreen | 7-inch | 10.1-inch |
Memory | 32 GB | 64 GB |
Processor | Quad-core processor | Hexa-core processor |
Camera | 8.0 Megapixel | |
Resolution | 1024x600 | 1920x1200 |
AURO OtoSys IM100 Specifications:
Recommended Use | Indoor |
Operating System | Android™ 4.4.4, KitKat |
Processor | Cortex-A9 processor (1.6 GHz) |
Memory | 1GB RAM DDR3 & 32GB ROM |
Display | 7-inch LCD capacitive touchscreen with 1024x600 resolution |
Connectivity | Mini USB 2.0; |
USB 2.0; | |
Wi-Fi; | |
HDMI Type A; | |
Micro SD card slot (supports up to 32GB); | |
Sensors | Ambient light sensor for brightness auto changing |
Audio Input/Output | Input: N/A; |
Output: buzzer; | |
Power and Battery | 3.7 V/5000 mAh lithium-polymer battery; |
Charges via 5 VDC power supply; | |
Tested Battery Life | Around 4.5 hours of continuous use |
Battery Charging Input | 5 V/1.5 A |
Power Consumption | 500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V |
Operating Temp. | 0 to 55°C(32 to 131°F) |
Storage Temp. | -20 to 60°C (-4 to 140°F) |
Operating Humidity | 5% - 95% non-condensing |
Dimensions (W x H x D) | 237.8 mm (9.4”) x 148.6 mm (5.9”) x 35.5 mm (1.4”) |
Net Weight | 788 g (2.42 lb.) |
Supported Automotive Protocols | ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, |
SAE-J1850 VPW, SAE-J1850PWM, | |
ISO11898 (Highspeed, Middlespeed, Lowspeed and | |
Singlewire CAN, fault-tolerant CAN), | |
SAE J2610, GM UART,UART Echo Byte Protocol, | |
Honda Diag-H Protocol, TP2.0, TP1.6 |
Package includes:
1pc x OBD II Cable
1pc x Mini USB Cable
1pc x USB External Power Adaptor
1pc x Quick Guide
1pc x UP200
1pc x APB001 – EEPROM Adaptor
1pc x APB002 – 68HC908 Adaptor
1pc x APA002 – EEPROM Socket
1pc x APA001 – EEPROM Clamp Integrated MC9S12 Cable